Disposable Glove FAQs


Disposable gloves are a common form of personal protective equipment (PPE) used in many industries and settings to protect hands from contaminants and other hazards. Here is a guide to using disposable gloves: 

Choose the right type of glove for your task: Different types of gloves are designed for different tasks, such as latex gloves for medical use, nitrile gloves for chemical resistance, and vinyl gloves for food handling. 

Check for defects before use: Before putting on disposable gloves, inspect them for holes, tears, or other defects that could compromise their effectiveness. 

Put on the gloves correctly: Be sure to put on the gloves correctly, with the correct size and proper fit. Make sure that your fingers are not pinched or bent in the gloves, and that there is no excess space around the fingertips. 

Use the gloves for the intended purpose: Disposable gloves are not intended for multiple uses and should be changed often. Use them for the purpose for which they are intended. 

Remove the gloves properly: To remove disposable gloves, grasp the outside of the glove at the wrist and gently pull it off, turning it inside out as you remove it. Avoid touching the inside of the glove, which could transfer any contaminants to your hands. 

Dispose of the gloves properly: Dispose of disposable gloves in a trash receptacle or other designated disposal area. 

Wash hands: After removing the gloves, wash your hands thoroughly with soap and water to remove any remaining contaminants. 

By following these guidelines, you can help ensure that disposable gloves are used correctly and effectively to protect your hands from hazards. 


There are a few different ways to determine the correct size for disposable gloves: 

  • Measure your hand: One way to determine the correct size for disposable gloves is to measure the circumference of your hand at its widest point, typically around the knuckles. Most manufacturers will provide a size chart that lists the measurement for each glove size, so you can compare your hand measurement to the chart to find the right size. 

  • Try on gloves: If you have access to a sample of the gloves you plan to purchase, you can try them on to ensure the correct fit. Make sure that the gloves are not too tight or too loose and that your fingers are not pinched or bent in the gloves. 

  • Check the packaging: Many disposable gloves come in varied sizes, and the packaging will often indicate the size of the gloves inside. 

It is important to note that there may be some variations in glove sizes between different manufacturers, so it is always a clever idea to check the manufacturer's size chart or try the gloves on before purchasing. 

A good fit is important for ensuring that the gloves are comfortable to wear, provide the appropriate level of protection and dexterity, and prevent contaminants from entering the gloves. 


Nitrile, latex, and vinyl gloves are all types of disposable gloves commonly used for different tasks. Here are some key differences between them: 


Nitrile gloves are made from synthetic rubber and are often considered a good alternative to latex gloves for people with latex allergies. They are known for their durability and resistance to chemicals and are commonly used in medical, industrial, and food service settings.

Shop Nitrile Disposable Gloves


Latex gloves are made from natural rubber and are commonly used in medical and dental settings. They are known for their flexibility and dexterity, but some people may have an allergic reaction to the proteins found in natural rubber. 

Shop Latex Disposable Gloves


Vinyl gloves are made from PVC (Polyvinyl chloride) and are less expensive than nitrile and latex gloves. They are commonly used in food service and other light-duty tasks. They are not as durable as nitrile and latex gloves and are not as resistant to chemicals. 

Shop Vinyl Disposable Gloves

It is important to note that all three types of gloves can be suitable for different settings and tasks, and the best choice for an individual or organization will depend on their specific needs and preferences. 


The thickness of a disposable glove is measured in mils (one-thousandth of an inch), and it refers to the thickness of the material that makes up the glove. The thickness of a glove can affect its level of protection and durability. Thicker gloves provide more protection than thinner gloves, but they may also be less flexible and more difficult to move in. 

Here are a few things to consider when it comes to the thickness of disposable gloves: 


The thicker the glove, the more protection it provides against punctures, cuts, and other hazards. However, a thicker glove may not be as flexible or comfortable to wear as a thinner one. 


Thicker gloves are more durable than thinner gloves and can withstand more wear and tear. 


Thicker gloves may make it more difficult to feel objects or perform tasks that require a high level of touch sensitivity. 


Thicker gloves are typically better for heavy-duty tasks that require more protection, such as handling hazardous chemicals, while thinner gloves are better for tasks that require more dexterity, such as handling small parts. 


A thicker glove may not be as comfortable to wear for an extended period, especially in warmer environments. 

When choosing disposable gloves, it is important to consider the thickness of the glove in relation to the specific task for which it will be used. A thicker glove may be more protective, but it may not be as comfortable or suitable for tasks that require dexterity.

Top Disposable Gloves